WC 3 link kit has been designed to get the most suspension travel out of the rear of your FJ Cruiser. With Links over 20" longer than the stock links this kit has wheel travel in mind. This 3 link kit can be ran with coilsprings or 12" coilovers. This is a complete weld on kit that will require you to cut off your Toyota stock link mounts, As well with relocating your muffler. This kit will work with your stock Toyota housing or our WC Rearend, and also our cantaliver kit.
Includes
Weld on passenger side upper and lower link frame pivot
Weld on driver side lower link frame pivot
7075 Aluminum Lower Links with 1 1/4 Heims
1.5" Alum upper link with 7/8 Heims
Panhard bar with 3/4 heims
Weld on axle panhard bar mount
Stock axle upper link gussets
Weld on upper and lower shock mounts
Brake lines
Limit Strap Clevis and axle tabs
13-15 IN of travel depending on shock setup
All nessasary hardware, spacers, snap rings