Optimize your 4Runner's rear suspension travel with the WC 3 Link Kit. Featuring links over 20" longer than stock, this complete weld-on kit is designed for superior wheel travel and can be used with coilsprings or 12" coilovers. Requires removal of stock link mounts and muffler relocation. Compatible with stock Toyota housing, WC Rearend, and cantilever kit.
Includes:
- Weld-on passenger side upper and lower link frame pivots
- Weld-on driver side lower link frame pivot
- 7075 Aluminum Lower Links with 1 1/4" Heims
- 1.5" Aluminum upper link with 7/8" Heims
- Panhard bar with 3/4" Heims
- Weld-on axle panhard bar mount
- Stock axle upper link gussets
- Weld-on upper and lower shock mounts
- Brake lines
- Limit strap clevis and axle tabs
- 13-15 inches of travel (depending on shock setup)
- All necessary hardware, spacers, and snap rings
