WC 3 link kit has been designed to get the most suspension travel out of the rear of your 3rd Gen 4Runner. With Links over 20" longer than the stock links this kit has wheel travel in mind. This is a complete weld on kit that will require you to cut off your stock frame link mounts, As well with possibly relocating your muffler. This kit will work with your stock Toyota housing or our WC Rearend.
Includes
Weld on passenger side upper and lower link frame pivot
Weld on driver side lower link frame pivot
7075 Aluminum Lower Links with 1 1/4 Heims
Alum upper link with 7/8 Heims
Panhard Bar with 3/4 Heims
Stock axle upper link gussets
Weld on upper and lower shock mounts
Brake lines
Limit Strap frame tabs and axle tabs
13-15 IN of travel depending on shock setup and where it is strapped
All nessasary hardware, and spacers
Kit requires bumpstops to stop up travel. We have bumpstops and a bumpstop mounting kit avaliable seperate
