null
  • Wicked Creations Double Shear Coilover Conversion Wicked Creations Double Shear Coilover Conversion Wicked Creations Double Shear Coilover Conversion Wicked Creations Double Shear Coilover Conversion Wicked Creations Double Shear Coilover Conversion

    Wicked Creations Double Shear Coilover Conversion

    For the hardcore VW pan based bug or buggy builder. Wicked Creations offers its same great coilover conversion kit but with a double shear, and a lock for the pivot bolt. This takes a great percentageof the load off the bolt, and locks it in so it can't...

    $200.00 - $300.00
  • VW Spring Plate Conversion VW Spring Plate Conversion

    VW Spring Plate Conversion

    Easily convert your VW or VW pan buggy front orsion bar to coilovers with our Wicked Creations Spring plate conversion. Kit includes a set of torsion end plates, rear trailing arms plates, heim joints, and piviot bolt. Of course MADE IN USA

    $175.00
  • VW Front Trailing Arms VW Front Trailing Arms

    VW Front Trailing Arms

    2 1/4" x 1" - Allows up to 8" of travel when using stock length shock towers - Allows up to 13" of travel when using 10" travel shocks - All 4130 chromoly tubing - 2 1/4 longer and 1" wider than stock VW trailing arms - uses aftermarket link Pins - MADE...

    $850.00
  • VW Tow Bar Pins, Pair, Short Size, For Super Beetle

    VW Tow Bar Pins, Pair, Short Size, For Super Beetle

    These short VW Tow Bar Mounting Pins are replacement pins for the VW Super Beetle. They are included with the purchase of a new tow bar, so these should only be purchased as replacement pins. They are compatible with part #3131. These pins are 2.5...

    $9.95
  • VW Mounting Plate for Super Beetle Tow Bar

    VW Mounting Plate for Super Beetle Tow Bar

    This is a replacement mounting plate for the VW Super Beetle Tow Bar. The mounting plate permanently attached to the front of the Super Beetle and allows you to mount the tow bar to the car. This is a replacement part and is compatible with part #3131...

    $72.95
  • VW Engine Stand, Professional

    VW Engine Stand, Professional

    The professional VW engine stand features 2 long diagonal forward legs for more stability than our standard engine stand. The 4 arm engine bracket is gusseted for strength and firmly holds the engine case to the engine stand. The bright red paint offers...

    $359.95
  • VW Engine Stand, Rolling, Heavy Duty

    VW Engine Stand, Rolling, Heavy Duty

    This heavy duty Volkswagen engine stand will hold the engine or transmission of your Type 1, 2 or 3. It cannot be used with Type 4 (1700cc, 1800cc, 2000cc) engines. The do not fit.  This stand features a swivel head, heavy duty steel construction...

    $152.95
  • VW Engine Bench Mount, Head Assembly Tool

    VW Engine Bench Mount, Head Assembly Tool

    This Volkswagen bench mount head assembly tool is used for the easy removal of valve springs. California Prop 65 Warning:  Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Compatibility Please Note:The information listed...

    $58.95
  • VW Engine Bench Mount, Type 1

    VW Engine Bench Mount, Type 1

    This Volkswagen Bench Mount Engine Stand is compatible with Type 1 engines. This stand will mount onto your work bench, features a swivel head, and 1 5/8 inch male tube that slides into the mount. This can be used to hold Type 1, 2 or 3 engines or...

    $54.95
  • VW Tension Spanner Wrench

    VW Tension Spanner Wrench

    EMPI's VW or Audi Timing Belt Tensioner Spanner Wrench is designed to key into the timing belt tensioner. The tension spanner is a must when changing the timing belt on early watercooled VWs and Audis. California Prop 65...

    $32.95
  • VW Condenser Installation Tool

    VW Condenser Installation Tool

    EMPI's VW Condenser Installation Tool makes installing press in condenser plugs much easier. Condensers 02007, 02054, 02069 & 02074 all have press in plugs which can be difficult to install. The condenser tool is slotted for wire clearance and...

    $17.95
  • VW Transaxle Drain Plug Socket, 17mm

    VW Transaxle Drain Plug Socket, 17mm

    EMPI's VW Transaxle Drain Plug is a 17mm Allen Head and fits a 3/8 Inch Drive Ratchet. The Allen drive socket can be used to remove or install the transmission drain or fill plugs and also fits the IRS Suspension Pivot Bolt. California Prop 65...

    $5.95
  • VW Transaxle Drain Plug Wrench, 17mm VW Transaxle Drain Plug Wrench, 17mm VW Transaxle Drain Plug Wrench, 17mm

    VW Transaxle Drain Plug Wrench, 17mm

    This VW Transaxle Drain Plug Wrench is 17 millimeters. California Prop 65 Warning:  Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Compatibility Please Note:The information listed below is for stock, unmodified VW's...

    $10.95
  • VW Axle Nut Removal Tool, 36mm VW Axle Nut Removal Tool, 36mm

    VW Axle Nut Removal Tool, 36mm

    This Volkswagen axle nut removal tool is 36 millimeters and can be used in conjunction with your 1/2 inch breaker bar to remove rear axle nuts. It is compatible with Type 1, 3 and 4 and Type 2, 1962 and prior. California Prop 65...

    $14.95
  • VW Axle Nut Removal Tool, 46mm

    VW Axle Nut Removal Tool, 46mm

    This Volkswagen axle nut removal tool is 46 millimeters and is compatible with Type 2s from 1963 and later. It can be used in conjunction with your 1/2 inch breaker bar to remove rear axle nuts. California Prop 65 Warning:  Warning: Cancer...

    $13.95
  • VW Gland Axle Nut Socket, 36mm, 1/2 Inch Drive

    VW Gland Axle Nut Socket, 36mm, 1/2 Inch Drive

    This Volkswagen gland/ axle nut socket is 36 millimeters and has a 1/2 inch drive. It can be used in conjunction with your breaker bar to remove gland or axle nuts. California Prop 65 Warning:  Warning: Cancer and Reproductive Harm...

    $8.95
  • VW Axle Nut Socket, 46mm, 3/4 Inch Drive

    VW Axle Nut Socket, 46mm, 3/4 Inch Drive

    This Volkswagen Axle nut socket is 46 millimeters and has a 3/4 inch drive. This can be used in conjunction with your breaker bar to remove axle nuts on your aircooled VW. California Prop 65 Warning:  Warning: Cancer and Reproductive Harm...

    $12.95
  • VW Deck Height Measuring Tool

    VW Deck Height Measuring Tool

    This VW deck height measuring tool measures the distance from the top of the cylinder to the top of the piston. This easy to use tool measures the deck height with either the use of its own calibrated screw dial indicators, calipers of feeler gauges...

    $43.95
  • VW Valve Lifter Retaining Clips, Pair VW Valve Lifter Retaining Clips, Pair

    VW Valve Lifter Retaining Clips, Pair

    These VW valve lifter retaining clips are sold as a pair. They hold valve lifters in place during engine assembly. Install into the lifters to keep them from falling out during assembly. Also use when disassembling the engine to keep the lifters in...

    $6.95