null

SHOP BY CATEGORY

  • WC 2.50 FRONT HUB KIT WC 2.50 FRONT HUB KIT

    WC 2.50 FRONT HUB KIT

    Whats included (4) 2.5 bearings (2) Hubcentric Cap (4) 2.5 races (installed) 5/8 Heat treated race studs (except 5 x 150mm Hubs) (2) Billet hubs (2) rotor adapter (2) 2.5 seals All hardware and O-rings Made in-house in the USA YOU WILL NEED TO PURCHASE...

    $1,950.00 - $2,400.00
  • WC Billet Sway Bar Arms - S3

    WC 1" Wide billet sway bar arms are 19" center of torsion to end of arm. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. These arms require you to make your own heim mounts. Sold as a pair

    $400.00
  • WC Billet Sway Bar Arms - S WC Billet Sway Bar Arms - S

    WC Billet Sway Bar Arms - S

    WC 1" Wide billet sway bar arms are 17" center of torsion to end of arm. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. These are the arms we run on our Canatliver kits. They also have a additional mounting hole on the...

    $400.00
  • WC Billet Sway Bar Arms -C

    WC Billet Sway Bar Arms -C

    WC 2" Wide billet sway bar arms are 26" center of torsion to end of bar.  This three hole design lets you create a mount for the heim that is exactly where you need it. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts...

    $500.00
  • WC Billet Sway Bar Arms WC Billet Sway Bar Arms

    WC Billet Sway Bar Arms

    WC 2" Wide billet sway bar arms are 24" center of torsion to center of heim. They take a 1 1/4 x 48 spline torsion bar and include the pinch bolts and nuts. Sold as a pair.

    $500.00
  • Toyota Spindle Gussets Toyota Spindle Gussets

    Toyota Spindle Gussets

    Stiffen up your Toyota spindle with our .125 thick laser cut and CNC bent spindle gussets. Designed to increase strength for your stock spindle. Welding and grinding are required to install. A must when you are offroading.

    $40.00
  • WC Ford F-150 Axle Kit

    WC Ford F-150 Axle Kit

    The long travel axle assemblies allow you to retain 4WD with the WC long travel kit and make the installation process as easy as possible. The shafts are machined from 300M, heat treated, and assembled with OEM axle cores. The axle cores are inspected...

    $1,200.00
  • WC Toyota 4WD Axle Shafts

    WC Toyota 4WD Axle Shafts

    The long travel axle assemblies allow you to retain 4WD with the WC long travel kit and make the installation process as easy as possible. The shafts are machined in house from 300M, heat treated, and assembled with OEM axle cores. The axle cores are...

    $1,200.00 - $1,250.00
  • 2021-2022 Ford Bronco Rear Upper Links 2021-2022 Ford Bronco Rear Upper Links 2021-2022 Ford Bronco Rear Upper Links

    2021-2022 Ford Bronco Rear Upper Links

    WC new 2021-2022 Frod Bronco rear upper links. This offset links are made to clear all factor componets as the stock links do. These much stronger links are CNC out of billet 6061, 7/8 uniballs on both sides, and are 100% bolt in. Pair these with our...

    $900.00
  • 2021-2022 Ford Bronco Rear Links

    WC new tubualr rear links provide much needed strength and apperance to the factory links on your 2021-2022 Ford Bronco. Combine these with out tubular billet upper links for the ultimate package. Includes 4130 .250 wall tube links, 1" uniballs, and...

    $550.00
  • Cropped - Wicked Creations USA -  Ford Bronco Rear Links, Ford Bronco Billet Rear Links, Bronco 21-22 Billet Rear Links, 2022 Ford Billet Rear Links Cropped - Wicked Creations USA Ford Bronco Billet Rear Links, Bronco 21-22 Billet Rear Links, 2022 Ford Billet Rear Links Ford Bronco 21-22 Billet Rear Links Wicked Creations USA Pair Ford Bronco 2022 Billet Rear Links - Wicked Creations USA Two 2022 Bronco Ford Billet Rear Links - Wicked Creations USA

    Ford Bronco 21-22 Billet Rear Links

    WC new billet rear arms provide much needed strength and appearance to the factory links on your 2021-2022 Ford Bronco. Combine these with out rear billet upper links for the ultimate package. Includes 6061 Billet aluminum links, 1" uniballs, wobble...

    $1,250.00
  • 2  1/2" ID Clamp

    2 1/2" ID Clamp

    Can-Am Owners, this clamp is 2 1/2" ID 3" OD, this means it a perfect clamp for the big tube behind the rear seats. Perfect for mounting your spare tire onto, or any toher accessory. Machined from 4130 bar and tig welded brackets. Clamp also comes with...

    $30.00
  • Toyota Billet Upper Arm Mounts Toyota Billet Upper Arm Mounts Toyota Billet Upper Arm Mounts Toyota Billet Upper Arm Mounts Toyota Billet Upper Arm Mounts

    Toyota Billet Upper Arm Mounts

    If you have a Toyota you know the struggle of the upper control arm bolt. These weld on billet brackets are made to eliminate that problem. These brackets use (2) 1/2 bolts and nuts and have a 2" spread for a rod end spacer. This is a must for easy...

    $650.00
  • 2003-2021 Toyota 4Runner 5in Over Long Travel Kit 2003-2021 Toyota 4Runner 5in Over Long Travel Kit 2003-2021 Toyota 4Runner 5in Over Long Travel Kit 2003-2021 Toyota 4Runner 5in Over Long Travel Kit

    2003-2021 Toyota 4Runner 5in Over Long Travel Kit

    The Wicked Creations long travel kit was developed to drastically improve the vehicles off-road handling without compromising its day to day driving characteristics. This suspension system allows for 13.5” of travel and accepts up to a 35”...

    $3,200.00 - $4,400.00
  • WC RZR 170 Nerf Bars

    WC RZR 170 Nerf Bars. These are made out of 3/4 tubing and bolt on to stock mounting holes. These protct the driver and the tires. Also can be used as a step to get into the vehicle. 

    $250.00
  • WC RZR 170 Rear Swing Arm

    Made from 1-1/4 x .120 chromoly tubing. Comes complete with all hiems and spacers needed to just bolt right on. These swingarms are standard lenght, and will accept a wider axle.

    $525.00
  • WC RZR 170 +3 A-Arms WC RZR 170 +3 A-Arms WC RZR 170 +3 A-Arms WC RZR 170 +3 A-Arms

    WC RZR 170 +3 A-Arms

    Race legal  RZR 170 +3 AArms kit available that has two hiems to adjust camber on front end.  These are have won multiple championships and races.

    $650.00
  • Fuel Safe Fuel Cell Cradle

    Fuel Safe Fuel Cell Cradle

    Wicked Creations fuel cell cradles are designed and made out of 1/8" steel construction. Parts include cradel and (2) cradle sides. Welding is required as all parts come serperate. This are for Fuel Safes truck fuel cells. Fits these Fuel Safe Cells 50...

    $350.00
  • WC 2.5 REAR HUB KIT WC 2.5 REAR HUB KIT WC 2.5 REAR HUB KIT

    WC 2.5 REAR HUB KIT

    Whats included (4) 2.5 bearings (2) 35 or 40 spline drive plates (2) Hubcentric cap (4) 2.5 races (installed) 5/8 Heat treated race studs (except 5 x 150mm Hubs) (2) Billet hubs (2) Rotor adapter (2) 2.5 seals All hardware and O-rings Made in-house in...

    $2,400.00 - $3,000.00
  • WC 5/8 x 18 Lug Nuts

    WC 5/8 x 18 Lug Nuts

    Wicked Creations Machined Lug Nuts, These lug nuts are made in-house right here in the USA. These have 5/8 x 18 thread, 60 deg taper, and are zink plated. They fit a 1" socket. These allow you to fully tighten your wheels without digging into your...

    $50.00 - $240.00
  • WC Billet Link Mounts

    WC Billet Link Mounts

    Wicked Creations 4130 Billet Lower Link Mounts. These link mounts are machined in house out of 3/4" thick 4130 plate. These are machined for either a 3.5" housing or a 4" housing. They have a 3/4" bolt hole and are 3/8" thick at the bolt hole. Also come...

    $450.00
  • 5" Round Mirror 5" Round Mirror 5" Round Mirror

    5" Round Mirror

    5" Round Black Mirror With Flat Mirror Glass. Durable Steel Backing Includes Built In Threaded Mounting Post.

    $15.25
  • Energy Suspension Urethane Bushing

    Energy Suspension Urethane Bushing

    This Energy Suspension Bushing is what we use in all of our Long Travel Kits. These have a outside measurment of 2" a 1/4" wall and a 1" hole through. These are sold per bushing. Example- One control arm willl require 4 bushings.

    $6.50
  • WC Rear Sway Bar Kit WC Rear Sway Bar Kit

    WC Rear Sway Bar Kit

    This is a complete kit for our FJ Cruiser and 4Runner rear cantilever. This kit includes, (1) torsion bar, all bushings, heims, collars, mounts, hardware, and sway bar arms

    $1,100.00